
Add to Cart
100 % Heavy Duty 4 Meters 4s Car Park Barriers With Remote Control
Car Park Barriers Model Selection and Differences
Car Park Barriers Specifications
Car Park Barriers Model | WST1211 |
Car Park Barriers Working Temperature | -40℃~+75℃ |
Car Park Barriers Voltage | 220V±10%, 110V±10%, 50/60HZ |
Car Park Barriers Rated power | 80W |
Car Park Barriers Relative humidity | ≤90% |
Car Park Barriers Remote control distance | ≥30m |
Car Park Barriers Net weight | 48kgs |
Car Park Barriers Speed | 1S,1.8S,3S, 6S |
Car Park Barriers Max boom length | 6 meters |
Car Park Barriers Motor Rotational speed | 1400rmp |
Car Park Barriers Protection Degree | IP44 |
Why choose our Car Park Barriers?
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining authority of this product instruction and service article belongs to the production factory.
Communication with customers
1) Q: Connected power and pressed the open/close button but the Car Park Barriers no action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the Car Park Barriers will move but even when it is in the right position, the motor still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the Car Park Barriers arm is not in action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, Car Park Barriers arm cannot reach the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm is at 180° horizontal position if the master rod and slave one are in the same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal
|
What are the advantages of Wonsun barriers?
1)The humanized clutch device: in case of power off, unlock the clutch device and raise the boom manually. By the time the power is supplied, lick the clutch device to make it work normally again.
2)Special spring device: Both the compression spring and tension spring can be used in the machine, Using the compression spring can avoid accidents caused by the tension spring.
3)Three control buttons: for boom raising, falling, and pausing.
4)Car Park Barriers Boom backtrack function: the boom will rise if hits something when falling.
5)Infrared photocell design: for avoiding the crash when the boom falls, to prevent the vehicles from being pressed.
6)Both external and internal loop detectors are supported.
7)"open", "close" and "stop" controlling interfaces.
8)RS-485 communication serial interface(optional)
9)Traffic light signal connection device: red light for stop, green light for pass.
10)Car Park Barriers Remote control and wire control for selection.
Contact information:
Sue Zhang
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com