Redear RFID Roads Vehicle Barrier Gate Car Parking Guidance System

Redear RFID Roads Vehicle Barrier Gate Car Parking Guidance System

Functions & Features:

a. Manual release device to operate the barrier when power failure
b. Barrier motor with die-casting aluminum alloy is high-hermetic and easy for heat dissipation
c. Motor cooling fan to avoid the over-heating possibility
d. AC motor is more powerful and no maintenance.
e. Automatic reversing when the barrier boom meets the obstruction
f. Auto closing realization through menu setting on the control panel
g .The barrier works well with infrared photocells, loop detectors, card readers, ticket dispensers, manual
switch (wire control), and traffic light
h. RS485 Communication Module is compatible

Best Service:

1. OEM/ODM order are accepted, we have 7 years OEM/ODM experience
2. Price can be negotiable with order quantity.
3. 2 professional technicists can give you best support.
4. Mould production of accessories, can provide you any replace of barrier gate.
5. Professional sales team can provide you professional answers and quick response of your questions.
6. Sample order is OK for testing its function and working performance.
7. Warmly welcome for visiting our factory and having a face to face negotiation.

FAQ:

1. When barrier finish closing, why does the arm open itself slowly?

• the spring is too tight, you need release the spring a little, then test it again.
• see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
• reset the balance position and the electrical limit switch.

2. Why does the controller panel operate with "Di Di Di" abnormal noises?

• As for this, it means the resistance on controller board is broken, if you have professional tools to check,
• then replace that broken resistance, if not, replace that controller panel.

3. Why does the barrier finish half operation of opening and closing?

• If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.

4. When barrier closed, why is there a 5 degree angle of inclination?

• the model is not good, and the gear doesn't fit each other tightly.
• the barrier didn't adjust well, need to reset.

5. When barrier finish open, but it closes itself without any order control, what's the problem?

• To check the loop cable first, because the loop cable maybe brokem
• To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.

6. Why does the arm wave a lot when opening and closing?

• The spring is very tight
• The Screw touches the rubber absorption tightly, need to reset again.

7. Rubber linning installation suggestion:

• It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
• The place with many vehicles come and go, like shopping center, carpark area.

8. Can you accept OEM/ODM order?

• Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.