Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd Quality is the first priority!
Add to Cart
Steel Housing Unique Design 6s Automatic Barrier Gate Folding Fence Arm
Automatic Barrier Gate Functions & Features:
1. Handwheel device to operate the Automatic Barrier Gate when power fails.
2. Automatic Barrier Gate Machine core with compression spring, effectively avoids the accidents caused by spring breaking.
3. Automatic Barrier Gate Motor cooling fan to avoid the over-heating possibility
4. Auto-reverse when the boom meets obstruction
5. Infrared photocells interface is available
6. Loop detector interface is available
7. Well-integrated with car parking system equipment, with wire control (push button)
8. Interface for traffic light
9. Offering dry contact signal for car parking system (COM, NC, NO)
10. Auto-delay when closing (adjustable)
11. Automatic Barrier Gate Remote control frequency: 418MHz
12. Automatic Barrier Gate Boom with the protective rubber band
Automatic Barrier Gate Parameters
| Automatic Barrier Gate Name | Automatic Barrier Gate | Automatic Barrier Gate Application | Automatic Barrier Gate Parking System |
| Automatic Barrier Gate Speed | 1.5/3/6 second | Max Boom Length | 6m |
| Automatic Barrier Gate Power Supply | AC220V/AC110V | Rated Power | 80W |
| Automatic Barrier Gate Motor Rotational Speed | 1400rpm | Protection Degree | IP44 |
| Automatic Barrier Gate Working Temperature | -35℃~60℃ | Humidity | ≤90% |
| Automatic Barrier Gate Remote Control Distance | ≥30m, ≤100m | Feature | Wheel Clutch |
| Automatic Barrier Gate Net Weight | 44kg | Gross Weight | 49kg |
| Automatic Barrier Gate Certificate | CE/ISO | Boom Type | Octagonal boom |
Motor Speed and Boom Type:
| Automatic Barrier Gate Boom type | Boom Length(M) | Opening time(S) | Height between boom and ground(M) |
| Automatic Barrier Gate Straight boom | 6M≥L＞4.5M | 6S | H=0.8M |
| 4.5m≥L＞3M | 3S | ||
| 3m≥L | 1.5S | ||
| Automatic Barrier Gate Folding boom 90-degree | 5m≥L＞3M | 6S | |
| 3m≥L | 3S | ||
| Folding boom 180 degree | 5m≥L＞3M | 6S | |
| 3m≥L | 3S | ||
| Fence Boom Two-level | 5m≥L | 6S | H=0.9M |
| Fence boom Three-Level | m≥L | 3S | H=1.5M |
Automatic Barrier Gate Warranty:
1. The Automatic Barrier Gate Drive Motor is warranted against the manufacturer’s defect for the lifetime
2. Automatic Barrier Gate Standard warranty for all components is valid for12 months from the date of delivery
3. This Automatic Barrier Gate warranty does not include damages caused by:
a. Wear and Tear
b. Theft
c. Accidents
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)
Automatic Barrier Gate Arm position adjustment.
2)First please set the arm horizontally and vertically through the regulating nut to lengthen or shorten the connecting rod, and then tighten the M12 safety nuts.
2)To make the arm well-balanced, please adjust the M8*140MM spring regulating screw accordingly.
3)For the barrier gate with double springs, please adjust the springs simultaneously.
FAQ:
1. When the Automatic Barrier Gate finishes closing, why does the arm open itself slowly?
The Automatic Barrier Gate spring is too tight, you need to release the spring a little, and then test it again.
See whether the main crank touches the triangle tightly or not, if tightly, adjust it.
Reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
As for this, it means the resistance on the controller board is broken, if you have professional tools to check,
then replace that broken resistance, if not, replace that controller panel.
3. Why does the barrier finish half operation of opening and closing?
If use our controller panel, you only need to find resistance R37 on the controller panel and replace it is ok.
4. When the barrier closed, why is there a 5-degree angle of inclination?
The Automatic Barrier Gate model is not good, and the gear doesn't fit each other tightly.
The Automatic Barrier Gate didn't adjust well, need to reset it.
5. When the Automatic Barrier Gate finishes opening, but it closes itself without any order control, what's the problem?
Check the loop cable first, because the loop cable may be broken
To check the motor sensor, if it is not set well, then reset it in the middle between two holes on the sensor rod.
6. Why does the Automatic Barrier Gate arm wave a lot when opening and closing?
The Automatic Barrier Gate spring is very tight.
The Screw touches the rubber absorption tightly and needs to reset again.
7. Rubber lining installation suggestion:
It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
The place with many vehicles coming and going, like shopping centers, and carpark areas.
8. Can you accept OEM/ODM orders?
We are manufacturer of barrier gate, with 7 years researching and developing experience.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831