Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd Quality is the first priority!
Add to Cart
Solar Power 2 Year Warranty Automatic Barrier Gate Boom Gates
Automatic Barrier Gate Functions:
1. The Automatic Barrier Gate automatically opens when the power is off, with no clutch design, and no need for human intervention. When the power is on, the Automatic Barrier Gate automatically reset, and the Automatic Barrier Gate returns to being closed, truly unattended, according to fire safety standards. If there is a special need, manual operation is required when the power is off, the operating arm can open and close manually. Can also set up the control board DIP switch, which will ensure the system can be used at any time
2. The use of a Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easily broken, safe, and reliable.
3. A variety of input and output modes can be selected, normally open normally closed are optional.
4. The arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.
5. Automatic Barrier Gate Speed can be adjusted.
Automatic Barrier Gate Data sheet
| Automatic Barrier Gate Max boom length | 6 meters |
| Automatic Barrier Gate Opening time | 0.6sec to 6sec |
| Automatic Barrier Gate Power | Max 100w |
| Automatic Barrier Gate Housing Material | Powder-coated steel/ Aluminum |
| Automatic Barrier Gate Net weight (no boom) | 43KG |
| Automatic Barrier Gate MTBF | 10 million times |
| Automatic Barrier Gate Working temperature | -40°C~+50°C |
| Automatic Barrier Gate Protection grade | IP65 |
| Automatic Barrier Gate Driving unit | Servo motor |
Program 1
The Automatic Barrier Gate can be controlled by a two-key push button and an impulse will trigger the operation relay.
Connecting GND and COM, 24V with UP is for machine opening, and 24V with Down is for machine closing. Other accessory interface inputs, like IR sensor and loop detector signal, are available.
Program 2
The Automatic Barrier Gate can be controlled by remote controller or GSM gate opener.
Connecting the antenna receiver GND to COM on the board, Remote-up is for opening and Remote-down is for closing.
If the remote control receiver is a non-electric relay signal, connect GND and COM first. The 24V connecting with Remote-up opens, and the 24V connecting with Remote-down closes.
Program 3
TheAutomatic Barrier Gate can be controlled by gate photocell(IR sensor) or loop detector for automatic opening and closing. There are other signal inputs as emergency stop and alarm signals. The connection is as Program 1 mentioned.
Program 4
Automatic Barrier Gate Boom-drop signal input: when the boom is crashed by a passing vehicle, the Automatic Barrier Gate will stop to run with a warning output.
| Title | Specification | Qty | Unit | Note |
| Automatic Barrier Gate boom | 1 | Piece | ||
| Machine case pressboard | 2 | piece | For fixing case | |
| Expansion bolt | M16X150 | 4 | set | For fixing case |
| Supporting pole | 1 | piece | Optional part | |
| Expansion bolt | M8 | 4 | unit | For fixing boom |
| Automatic Barrier Gate Boom fixed screws | M12*70 | 2 | unit | |
| Case Key | 2 | unit | ||
| Balance spring | 1 | unit | For spare usage | |
| Remote controller | 2 | unit | ||
| Machine control | 1 | unit | ||
| Instruction | 1 | piece |
Suggested Application
High-speed Automatic Barrier Gate can only be used for toll stations for highways and main roads.
The medium-speed barrier gates are designed to control the entrance and exit channels for the parking area, multi-story car parking lot, and other vehicular access routes.
The controller is specifically designed to control the barrier gates.
It is not permissible to use these barrier gates for any other purpose.
Any changes and replacements to the barrier gates and the control components are prohibited.
RFQ
1. Q: How long will your barrier work?
A: barrier life span more than 10 years.
2. Q: What should we do if there are problems during use?
A: We have 2 year guarantee. If any barrier problems you have, Welcome to email or call me! We will provide our best professional service for you.
3. Q: First-time import, how can I believe that you would send a product?
A: We are a verified company by Everychina, to make transactions successful.
4. Q: How to import your machines?
1. We will prepare the barrier and shipment for you after payment;
2. We will give you a bill of loading after the barrier departs our shipping port;
3. Our shipping agent will contact you when the barrier arrives;
4. You can pick up barriers by bill of loading.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831