Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd Quality is the first priority!
Add to Cart
1.5S - 6S Powder Coating DC Brushless Car Barrier Gate Operator For Parking Lot
Quick details:
1. use simple driving actuating mechanism to reduce mechanical failer and maintenance free
2. equiped with high- sensibility magenet sensing limit control system
3. Working model:Remote control, push button and manual handle
4. Working environment:indoor or outdoor
5. Rising/falling time:1.5s-6s
6. Standard lever length:<=6m
| Functions And Features: |
| 1. The boom gate is widely used in the facilities of parking lot, traffic or toll system. |
| 2. The arm length can be selected from 3 meters to 6 meters. |
| 3. The movement adopts a compression spring, which can effectively avoid accidents caused by spring breakage. |
| 4. Two-way self-locking function. |
| 5. The "open door" command has high priority. |
| 6. "Close" command memory function is available. |
| 7. Remote control interface, can be equipped with remote control transmitter. |
| 8. Can be equipped with a loop detector. |
| 9. Infrared detection interface, can be equipped with infrared detection device. |
| 10. The wave pressure device is controlled by a wave pressure switch to prevent hitting cars or people. |
| 11. The housing of the barrier gate adopts advanced waterproof structure and anti-aging plastic spraying treatment, which is durable, simple in structure, and stable and reliable in operation. |
Communication with customers
1. Motor works but there is no reaction on the arm.
a. Please check whether the clutch device is locked or not.
2. There is too much vibrant when the boom is rising or falling.
a. Please check whether the shock absorption rubber is broken or not, if yes, change a new one.
b. Please check whether the balance spring is overused and distorted. If yes, change a new one.
b. Please check whether the balance spring is overused and distorted.If yes, change a new one, or spin
bottom adjust nut.
3. The boom could not rise up or fall down to the end.
a. When change a long boom to a short one, please readjust it.
b. The sensor does not plug well, please chek it.
c. The " Speed adjust switch" is wrong adjust, please readjust it.
4. The distance of the remote control decreases.
a. Check whether the charge capacity of the remote controller is enough or not.
5. There is no reaction when pressing the remote controller buttons.
a, Please check whether the power is supplied to the barrier gate or not.
b. Please check whether the fuse is burnt out or not.
c. Please check whether the code both in the remote controller and the control board are accordant or not.
6 There is no reaction on the motor when the user changes a control board.
a. Please check the capacitance is correctly fixed or not.
b. Please check the sensor is right inserted or not.
Contact information:
Sue Zhang
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com